| |
Assembly conveyor
|
 Click to enlarge image |
|
1.ASSEMBLY CONVEYOR
1)PGS SERIES
FEATURE
▶ DESIGNED FOR UPPER & SOLE GOING THROW SEPERATE HEATING
CHAMBER AND THIS SYSTEM CAN PROVIDE INDEPENDENT TEMPERATURE
CONTROL IN ACCORDANCE WITH THE CHARACTER OF CEMENTING GLUE.
▶ ALL MAJOR FUNCTIONS SUCH AS 1 ST DRYING, 2ND DRYING AND
DRIVING SPEED CAN BE PRE-SET VIA THE P.L.C UNIT WHICH HAS 8
CHANELS IS STANDARD MODEL. AS ITEMS OPERATE DELETE & RE-
INPUT.
▶ JET FAN BLOWER IS SPECIALLY DESIGNED TO OPERATE HIGH
TEMPERATURE 150℃. ALL CHAMBER'S FORCED AIR CAN MAINTAIN
REGULAR TEMPERATURE.
AS BUYER NEEDS ENABLE TO FORCED AIR SPEED CONTROL SYSTEM BY
INVERTER CIRCUIT.
▶ HYDROMECHANICS DESIGNED NOZZLE & AIR ROTATION EQUIPMENT
IS DISPLAY TELL MAX WIND SPEED 12M/SEC, HEATING CHAMBER ALL
MAJOR'S DEGREE IS AVAILABLE ON THE CONTROLLER DEFLECTION
WITHIN ±1.5℃.
▶ HIGH EFFICIENCY PIPE HEATER IS PREPARE AGAINST TROUBLE
ADHERED DUPLICATION. TEMPERATURE IS MAX 135℃ DEGREE PRIMER
& 1ST 2ND CEMENTING CHAMBER.
▶ INFRARED RAYS ACTIVATE HEATER IS SEPREATED LEFT, RIGHT
PART CAN TEMPERATURE CONTROL BEFORE PRESSING WORK ADHERED
DUPLICATION FOR REASONABLE ADHESIVING DEGREE.
▶ USE DAMPER DUCT FOR GET RID OF EXHAUST & FRAGRANCE AT
WORKING TIME.
2. VERSATILE OF HANGING BAR
LASTED UPPERS ARE TRANSPORTED THROUGH THE PGM LINE USING
AUTO-ADJUSTING HANGING BARS, WHITCH AUTO-MATICALLY TO THE
SIZE AND SHAPE OF SHOE.
MOREOVER, IT IS OUR OWN PATENT THAT PGM HANGING BARS ARE
TAPERED ABOUT 3 DEGREES (EDGE INPUT AREA IS 9MM WIDER THAN
CENTRAL AREA) AND IT ENABLES TO MAKE EASIER LOADING &
UNLOADING FROM SIZES 19~54PAIRS POINTS (ENGLISH SIZE 3~18)
WITHOUT ANY DROPPING OUT OF LACE FASTENER.
BOOTS WITH LEGS UP TO 400MM(16') LONG CAN ALSO BE
PROCESSED. A STRONG HANGING BARS MADE OF ACETAL SYNTHETIC
RESIN HAVING EXCELLENT HEAT-RESISTANCE, IMPACT-RESISTANCE.
AND DURAB ILITY.
FOR SOLES. ELECTROSTATIC COATED STEEL OR MOULDED ACETAL
SYNTHETIC RESIN MESH ARE APPLIED.
BR>
3.NEW CEMENT DRYING & ACTIVATING
1)QUICK RETURN BELT C/V
QUICK RETURN BELT C/V SYSTEM HAS BEEN DEVELOPED ESPECIALLY
TO COMPLEMENT THE PGM LINE WHEN
PROCESSING SPORTS FOOTWEAR WITH WALLED SOLE UNITS.
THE QIACK RETURN BELT CN DELIVERS SHOES AND SOLES TO THE
SOLE SPOTTERS, AND TRANSFER PROCESSED WORK
DIRECTLY TO SOLE PRESS OPERATOR.
2)DUAL DRIVING UNITS
TO MINIMIZE NOISES & CATCHING EFFECTS WHICH MAY CAUSED FROM
DIFFEIRENT FULLING POWER BETWEEN TENSION & LOOSE SIDE OF
CHAIN, DUAL DRIVING SYSTEM IS INTRODUCED TO PGM LINE.
ECONOMICAL POWER CONSUMPTION, HIGH EFFICIENCY, NOISE
REDUCTION TYPE OF GEARED MOTOR ARE INSTALLED TO THE BOTH
FRONT AND REAR SIDE OF WORK-HOLDING CONVEYOR END.
3)VERSATILE OF HANGING BAR
LASTED UPPERS ARE TRANSPORTED THROUGH THE PGM LINE USING
AUTO-ADJUSTING HANGING BARS, WHITCH AUTO-MATICALLY TO THE
SIZE AND SHAPE OF SHOE.
MOREOVER, IT IS OUR OWN PATENT THAT PGM HANGING BARS ARE
TAPERED ABOUT 3 DEGREES (EDGE INPUT AREA IS 9MM WIDER THAN
CENTRAL AREA) AND IT ENABLES TO MAKE EASIER LOADING &
UNLOADING FROM SIZES 19~54PAIRS POINTS (ENGLISH SIZE 3~18)
WITHOUT ANY DROPPING OUT OF LACE FASTENER.
BOOTS WITH LEGS UP TO 400MM(16') LONG CAN ALSO BE
PROCESSED. A STRONG HANGING BARS MADE OF ACETAL SYNTHETIC
RESIN HAVING EXCELLENT HEAT-RESISTANCE, IMPACT-RESISTANCE.
AND DURAB ILITY.
FOR SOLES. ELECTROSTATIC COATED STEEL OR MOULDED ACETAL
SYNTHETIC RESIN MESH ARE APPLIED.
4).EXTRACTION & SOLVENT FUMES SUCTION DUST SYSTEM
FUMES ARE MAINTAINED BELOW RECOGNIZED SAFETY LEVELS BY
EFFICIENT VAPOUR EXHAUST SYSTEM, AN EXTRACTION ADAPTERON
EACH TOP SIDE OF MODULAR CHAMBER IS SUPPLIED AS STANDARD TO
ENABLE YOU TO SONNECT PGM LINE TO YOUR EXTERNAL EXTRACTION
SYSTEM AT SITE. TO ENSURE MAXIMUM WORKING ENVIRONMENT,
ADDITIONAL SOLVENT FUMES SUCTION SYSTEM IS ALSO PROVIDED.
SOLVENT FUMES WHICH ARISING DURING CIMENTING WORKS ENABLE
TO SUCK BY SUCTION HOOD HAVING SLOTTED HOLES. SUCTION HOOES
ARE INSTALLED JUST IN FRONT OF CEMENTING AREA AND THIS
HOODS ARE CONNECTED WITH SUCTION FANS LOCATED BENEATH THE
CEMENTING TABLE.
5)GENERAL DESCRIPTIONS
AND/OR SOLES ARE CONVEYED THROUGH A DRYING TUNNEL, WHERE
THEY ARE DRIED BY HIGH VELOCITY. ROOM TEMPERATURE AIR JETS.
THIS EFFECTIVELY SCRUBS THE SOLVENT FROM THE CEMENT LAYER,
AND BECAUSE THE AIR IS AT ROOM TEMPERATURE, THERE IS NO
DANGER OF 'SKINNING' THE CEMENT FILM. ON EXITING THE TUNNER
THE WORK ASSES BEMEATH AN INFRA-RED HEATER WHICH NOT ONLY
DRIVES ANY REMAINING SOLVENT FROM THE CEMENT, IT ALSO
ACTIVATES THE CEMENT ON BOTH SHOES AND/OR SOLES. AT THE
UNLOAD POSITION ANY WORK WAITING TO BE PICKED UP BY THE
SOLE ATTACHING OPERATOR IS DETECTED BY A이때, PHOTO-
ELECTRIC CELL WHICH STOPS THE CONVEYOR, THIS
AUTOMATICALLY REDUCES THE OUTPUT OF THE HEATER TO PREVENT
THE CEMENT FILM OVERHEATING.
6)CONTROLLED ACTIVATION
AFTER AIR DRYING IS ACHIEVED USING HIGH VELOCITY JET AIR,
UPPER & SOLED ARE GOING THROUGH BENEATH THE INFRA-RED
ACTIVATING HEATER WHICH IS LOCATED EACH OUTLET SIDE OF
DRYING CHAMBER. THE INFRA-RED HEATERS ARE DESIGNED TO MAKE
THE PGM LINE INSENSITIVE TO VARIATIONS IN THE COLIURS OF
WORK AND TO DIFFERENT HEIGHTS OF SOLE UNITS. THIS ENSURES A
UNIFORM AND CONSISTENT DRYING AND ACTIVATION OF THE
ADHESIVE. ALL TYPES OF WORKS ARE PROCESSED TO A
CONSISTENTLY HIGH STANDARD. ACTIVATING TEMPERATURE CAN BE
CONTROLLED UP TO 350'C BY CONTROL MECHANISM.
VERSATILE OF HANGING BAR
LASTED UPPERS ARE TRANSPORTED THROUGH THE PGM LINE USING
AUTO-ADJUSTING HANGING BARS, WHITCH AUTO-MATICALLY TO THE
SIZE AND SHAPE OF SHOE.
MOREOVER, IT IS OUR OWN PATENT THAT PGM HANGING BARS ARE
TAPERED ABOUT 3 DEGREES (EDGE INPUT AREA IS 9MM WIDER THAN
CENTRAL AREA) AND IT ENABLES TO MAKE EASIER LOADING &
UNLOADING FROM SIZES 19~54PAIRS POINTS (ENGLISH SIZE 3~18)
WITHOUT ANY DROPPING OUT OF LACE FASTENER.
BOOTS WITH LEGS UP TO 400MM(16') LONG CAN ALSO BE
PROCESSED. A STRONG HANGING BARS MADE OF ACETAL SYNTHETIC
RESIN HAVING EXCELLENT HEAT-RESISTANCE, IMPACT-RESISTANCE.
AND DURAB ILITY.
FOR SOLES. ELECTROSTATIC COATED STEEL OR MOULDED ACETAL
SYNTHETIC RESIN MESH ARE APPLIED.
|
|
|
| |
 |
257-5, HAKJANG-DONG, SASANG-GU, PUSAN, KOREA
TEL:+82-51-323-2151~2
FAX:+82-51-323-9648 |
|
|
|
